Specification
| Product model | WBP-K02Z-PLC |
| Specification and size | 320×260×90mm |
| Net weight | 3.5Kg |
| Housing material | Galvanized plate |
| Node capacity | RS485:50 pcs (including detector and guide split screen) Powerbus:42pcs (including detector and guide split screen) |
| Operating voltage | AC 110～240V |
| Operating temperature | -30 ~ +75℃ |
| Communication mode | 1route CAN 2routeRS485/ 1routepowerbus |
| Communication distance | CAN:≤1000m RS485:≤300m powerbus≤130m |
| Power consumption | ≤2W(Own power consumption, without detector) |
Table 3.1 Technical parameters of the indoor zone controller
System architecture
Product Description
The indoor PLC zone controller is used to check the status of the connected detector and upload the relevant information to the indoor node controller.
The indoor PLC zone controller is used to connect the indoor node controller and the parking detector, LED display screen, etc., using RS485, CAN bus hybrid communication mechanism, to solve the problem of unreliable long-distance communication, network node number expansion problem, group management problem.
Product Features
1) The equipment has short-circuit, overvoltage and overload protection functions to prevent electrical damage to related equipment due to wiring errors during construction;
2) The overall industrial design, through strict static electricity, lightning and surge, group pulse testing, effectively ensure the reliable use of equipment;
3) It can quickly and effectively detect various states of the equipment, detect the communication of the equipment with one key after installation, and quickly diagnose the bus connection.
4) Support remote upgrade.
Product Installation
The indoor zone controller is usually installed on a column or wall, and is recommended to be installed at a height of 2 meters or more. The installation diagram is shown in Figure 4.1:
Parking Control K02ZPLC Indoor Zone Controller Using RS485 CAN Bus Hybrid Communication Mechanism
